Description
These products are all Made to Order
Which means they are non-cancelable and non-refundable
Minimum order quantity is 3000 feet. Price per foot.
Description
Tracer Tape II: Woven Polyester with Two 22 Gauge Wires
When it comes to buried duct, Tracer Tape reigns supreme as the discerning expert's choice. Our Tracer Tape boasts a solid corrosion-resistant copper conductor seamlessly integrated into our industry-leading products, offering a versatile solution for locating, pulling, and measuring ducts and fibers.
Simply direct a radio signal onto the Tracer Tape and follow standard locating procedures for effortless detection. Thanks to our Pull Tape's industry-leading low shrink factors, Tracer Tape is extrusion-friendly and can be easily pre-inserted by manufacturers or blown into ducts at the job site.
Equipped with printed sequential footage markings for precise measurements and factory pre-lubrication to ensure smooth pulling without the risk of duct burn-through commonly associated with rope products, Tracer Tape sets the standard for efficiency and reliability.
Derived from the champion pedigree of our brand, Tracer Tape embodies tomorrow's technology today, offering unparalleled functionality for locating, measuring, and pulling with a single, innovative product.
Features
Features
- Utilizes two 22 AWG copper wires for use where the possibility of signal interference or jump over conditions when exposed to armor jacketed cables or other utility exposure is possible.
- Pull, measure and locate with one product.
- Low coefficient of friction value minimizes burn-through of duct.
- Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
- Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
- Minimizes puckering in the extrusion process - less footage required for innerduct runs.
- Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
- Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.
Specifications
Specifications
| Tracer Tape Specification | |
| Tensile Strength | 1250 lb / 567 kg 1800 lb / 816 kg 2500 lb / 1134 kg |
| Construction | Woven |
| Wire Conductor Specifications | |
|---|---|
| AWG (Gauge) | 22 Solid Bare Copper |
| Diameter | 0.0253 Normal |
| Maximum Voltage | 300 V |
| Tensile Strength | 34,000 lb/in |
| Resistivity* | 16.2 Ω / mft |
Resistance values based on copper of 100% conductivity at 20°C
| Wire Insulation Specifications | |
|---|---|
| Type | High density polyethylene (HDPE) |
| Color | Orange |
| Thickness | 0.010" Nominal |
| Dielectric Constant | 2.34 @ 1 MHz |
Description
Tracer Tape II: Woven Polyester with Two 22 Gauge Wires
When it comes to buried duct, Tracer Tape reigns supreme as the discerning expert's choice. Our Tracer Tape boasts a solid corrosion-resistant copper conductor seamlessly integrated into our industry-leading products, offering a versatile solution for locating, pulling, and measuring ducts and fibers.
Simply direct a radio signal onto the Tracer Tape and follow standard locating procedures for effortless detection. Thanks to our Pull Tape's industry-leading low shrink factors, Tracer Tape is extrusion-friendly and can be easily pre-inserted by manufacturers or blown into ducts at the job site.
Equipped with printed sequential footage markings for precise measurements and factory pre-lubrication to ensure smooth pulling without the risk of duct burn-through commonly associated with rope products, Tracer Tape sets the standard for efficiency and reliability.
Derived from the champion pedigree of our brand, Tracer Tape embodies tomorrow's technology today, offering unparalleled functionality for locating, measuring, and pulling with a single, innovative product.
Features
Features
- Utilizes two 22 AWG copper wires for use where the possibility of signal interference or jump over conditions when exposed to armor jacketed cables or other utility exposure is possible.
- Pull, measure and locate with one product.
- Low coefficient of friction value minimizes burn-through of duct.
- Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
- Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
- Minimizes puckering in the extrusion process - less footage required for innerduct runs.
- Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
- Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.
Specifications
Specifications
| Tracer Tape Specification | |
| Tensile Strength | 1250 lb / 567 kg 1800 lb / 816 kg 2500 lb / 1134 kg |
| Construction | Woven |
| Wire Conductor Specifications | |
|---|---|
| AWG (Gauge) | 22 Solid Bare Copper |
| Diameter | 0.0253 Normal |
| Maximum Voltage | 300 V |
| Tensile Strength | 34,000 lb/in |
| Resistivity* | 16.2 Ω / mft |
Resistance values based on copper of 100% conductivity at 20°C
| Wire Insulation Specifications | |
|---|---|
| Type | High density polyethylene (HDPE) |
| Color | Orange |
| Thickness | 0.010" Nominal |
| Dielectric Constant | 2.34 @ 1 MHz |