Description
These products are all Made to Order
Which means they are non-cancelable and non-refundable
Minimum order quantity is 3000 feet. Price per foot.
Description
Tracer Tape: Woven Polyester with 22AWG Locator Wire - Price per Foot, Tensile Strength Options: 1250, 1800, and 2500 Pounds.
When it comes to underground ductwork, our Tracer Tape reigns supreme as the top choice for experts. It incorporates a robust copper conductor resistant to corrosion, seamlessly integrated into our leading Tracer Tape line. This results in a versatile product capable of locating, pulling, and measuring both duct and fiber.
Simply direct a radio signal onto the Tracer Tape and follow standard locating procedures for effortless detection. Thanks to our Pull Tape's industry-leading low shrink factors, Tracer Tape is extrusion-friendly, allowing for easy pre-insertion by manufacturers or blowing into ducts at the job site.
All Tracer Tapes come equipped with printed sequential footage markings for precise measurements and are factory pre-lubricated for smooth pulling without any risk of duct burn-through, unlike traditional rope products.
With a legacy of excellence behind our brand, Tracer Tape embodies tomorrow's technology today by offering a single-product solution for locating, measuring, and pulling.
Features
Features
- Pull, measure and locate with one product.
- Low coefficient of friction value minimizes burn-through of duct.
- Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
- Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
- Minimizes puckering in the extrusion process - less footage required for innerduct runs.
- Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
- Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.
Specifications
Tracer Tape Specifications | |
|---|---|
| Tensile Strength | 1250 lb / 567 kg 1800 lb / 816 kg 2500 lb / 1134 kg |
| Construction | Woven |
Wire Conductor Specifications | |
|---|---|
| AWG (Gauge) | 22 Solid Bare Copper |
| Diameter | 0.0253 Normal |
| Maximum Voltage | 300 V |
| Tensile Strength | 34,000 lb/in |
| Resistivity* | 16.2 Ω / mft |
*Resistance values based on copper of 100% conductivity at 20°C
Wire Insulation Specifications | |
|---|---|
| Type | High density polyethylene (HDPE) |
| Color | Orange |
| Thickness | 0.010" Nominal |
| Dielectric Constant | 2.34 @ 1 MHz |
Description
Tracer Tape: Woven Polyester with 22AWG Locator Wire - Price per Foot, Tensile Strength Options: 1250, 1800, and 2500 Pounds.
When it comes to underground ductwork, our Tracer Tape reigns supreme as the top choice for experts. It incorporates a robust copper conductor resistant to corrosion, seamlessly integrated into our leading Tracer Tape line. This results in a versatile product capable of locating, pulling, and measuring both duct and fiber.
Simply direct a radio signal onto the Tracer Tape and follow standard locating procedures for effortless detection. Thanks to our Pull Tape's industry-leading low shrink factors, Tracer Tape is extrusion-friendly, allowing for easy pre-insertion by manufacturers or blowing into ducts at the job site.
All Tracer Tapes come equipped with printed sequential footage markings for precise measurements and are factory pre-lubricated for smooth pulling without any risk of duct burn-through, unlike traditional rope products.
With a legacy of excellence behind our brand, Tracer Tape embodies tomorrow's technology today by offering a single-product solution for locating, measuring, and pulling.
Features
Features
- Pull, measure and locate with one product.
- Low coefficient of friction value minimizes burn-through of duct.
- Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
- Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
- Minimizes puckering in the extrusion process - less footage required for innerduct runs.
- Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
- Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.
Specifications
Tracer Tape Specifications | |
|---|---|
| Tensile Strength | 1250 lb / 567 kg 1800 lb / 816 kg 2500 lb / 1134 kg |
| Construction | Woven |
Wire Conductor Specifications | |
|---|---|
| AWG (Gauge) | 22 Solid Bare Copper |
| Diameter | 0.0253 Normal |
| Maximum Voltage | 300 V |
| Tensile Strength | 34,000 lb/in |
| Resistivity* | 16.2 Ω / mft |
*Resistance values based on copper of 100% conductivity at 20°C
Wire Insulation Specifications | |
|---|---|
| Type | High density polyethylene (HDPE) |
| Color | Orange |
| Thickness | 0.010" Nominal |
| Dielectric Constant | 2.34 @ 1 MHz |